Boom Lifts
Using a Boom Lift Inside a Building Under Construction
By Jonah Tan, Equipment Specialist · · 3 min read

Buildings under construction are full of obstacles: rows of shoring, scaffolding, formwork, wet patches and materials stacked everywhere. A boom lift can reach high ceilings and beams that a ladder or scaffold tower cannot, but only if it is the right machine and it is used carefully. Here is what to plan before using a boom lift inside a building under construction.
Pick an articulating boom for tight spaces
Indoors, an articulating boom is usually the better choice. Its hinged arm can reach up and over shoring, beams, cable trays and plant, and it needs less room to set up than a long straight telescopic boom. Compact electric models, such as the Dingli 16m articulating boom lift, also produce no exhaust fumes inside the building. Our telescopic vs articulated boom lift guide compares the two in detail.
Check the floor before you drive
- Ground floor slabs: usually fine, but watch for trenches, pits, openings and edges.
- Upper floors and suspended slabs: only drive on them once the site engineer has confirmed they can take the machine’s weight. Ask us for the machine weight early.
- Wet and slippery patches: go slowly. Puddles can hide holes, cables and debris.
Keep clear of temporary works
Shoring and scaffolding hold up the building while it is being built, so they must not be knocked.
- Plan the route through the building before moving the machine, with enough clearance on both sides.
- Never lean on, tie off to or push against shoring or scaffold with the platform or boom.
- Use a spotter when moving close to props, columns and edges.
Stop things falling on people below
Many sites ask for mesh or netting around the platform, like the one in the photo above, so tools and materials cannot drop onto people working underneath. Also barricade the area below the platform, and keep tools tied or in the platform tray.
Harness, rescue and pre-use checks
Operators on a boom lift should wear a full-body harness clipped to the platform anchor point, and someone on the ground must know how to use the ground controls and emergency lowering. Before each shift, the operator should do a pre-use check of the controls, alarms, tyres and safety devices. Our PMA and DOSH guide covers the documents sites ask for.
When a scissor lift is the better choice
If the work is straight up over a flat, clear floor, such as ceiling services between rows of shoring, a scissor lift may be cheaper and give the crew a bigger platform. The Dingli JCPT1412HD scissor lift suits high ceilings on firm, level floors. Read our scissor lift vs boom lift guide to compare.
Rent a boom lift for your project
Every A&G boom lift is serviced before delivery and comes with a valid PMA, with operator training available and 24/7 breakdown support for rental customers. We deliver to Johor, KL & Selangor. See our boom lift rental range, or WhatsApp us with your site, the height you need and your dates.






