Case Studies
Case Study: Boom Lift Delivery to Site, From Our Yard to Your Project
By Jonah Tan, Equipment Specialist · · 2 min read

This boom lift has just pulled up at a customer’s project site on the back of our lorry, ready to unload and go to work. We are not naming the site, but the steps behind this delivery are the same for every boom lift we send out.
Before the lorry leaves the yard
- Right machine for the job: we match working height, outreach and ground conditions to the right boom. This one is an articulating boom, which can reach up and over obstacles.
- Service and checks: every machine is serviced and checked at our yard in Iskandar Puteri before it is loaded.
- PMA and paperwork: the machine goes out with a valid PMA and its sticker on the unit. For site entry we send the machine model and insurance ahead to your safety team.
- Route and access: we agree the access route, gate height, unloading area and delivery slot with the site before the lorry sets off.
On arrival
The lorry parks in the agreed unloading area and the area is coned off before the machine comes down the ramps. We then check the ground where the boom will work and walk the machine to its first position.
Handover and operator training
At handover we go through the platform and ground controls, the daily pre-use check and emergency lowering from the ground. Operator training can be done on site, or at our yard before the job starts. Rental customers also get our 24/7 breakdown support for the length of the hire.
Need a boom lift delivered?
See every model on our boom lift rental page, or read our telescopic vs articulated boom lift guide if you are not sure which type you need. For data centre and large M&E jobs, our boom lift guide for data centre projects covers planning several machines at once.
Send your site location, working height and dates to our team or WhatsApp 012-308 9666, and we will plan the delivery.






