Scissor Lifts
Rough-Terrain Scissor Lift Guide: When to Use the Dingli JCPT1823DCL
By Jonah Tan, Equipment Specialist · · 3 min read

A rough-terrain scissor lift is the machine to pick when the job is high, the crew is big and the ground is not a polished floor. The Dingli JCPT1823DCL is the tallest scissor lift in our rental fleet: 18 m working height, a 680 kg large deck with roll-out extensions, diesel power and four levelling outriggers.
When a rough-terrain scissor lift is the right choice
- The work is high but straight up. Cladding, roof sheeting, steel erection, canopies and high ceilings in large structures. If you need to reach up and over something, look at a boom lift instead.
- Several people and materials go up together. The large deck carries a crew, tools and materials in one lift, so there are fewer trips up and down than with a boom basket.
- The ground is not a finished floor. Compacted earth, gravel, uneven concrete and site roads. Big lug tyres and diesel power handle conditions that would stop a battery machine.
Outriggers: why they matter
The photo above shows the JCPT1823DCL with its four outriggers down. The outriggers level the machine before the platform goes up, which is what lets a rough-terrain lift work safely on ground that is not perfectly flat.
Before you set up:
- Check the ground can take the load. Soft fill, fresh backfill, drain covers and trench edges can give way under an outrigger pad. Use spreader plates on soft ground.
- Stay within the slope limit in the operator manual. The outriggers level the machine, but they do not make a steep slope safe.
- Look up. Check for power lines, ducting, beams and sprinkler pipes in the travel and lift path.
- Read the SWL plate on the platform. It shows the safe working load, including how much is allowed on the extension deck. Never exceed it.
Diesel indoors? Only with good ventilation
A diesel rough-terrain lift can work in very large, open-sided spaces such as loading bays and semi-open structures, as long as the site allows diesel engines and the air can clear. In enclosed rooms, data halls, malls and finished interiors, use a battery machine such as the Dingli JCPT1614HAZ or the Dingli 12m Electric Scissor Lift instead.
Scissor lift or boom lift?
A scissor lift only goes straight up, so the machine must be able to park directly under the work. If there is a canopy, a drain, a ledge or plant in the way, a boom lift is usually the better answer. Our scissor lift vs boom lift guide explains how to decide, and our scissor lift height guide helps you pick the right working height.
Renting the Dingli JCPT1823DCL
Every rental comes serviced, with a valid PMA, operator training and 24/7 breakdown support for rental customers. We deliver to Johor, KL & Selangor on daily, weekly or monthly terms, with rates on enquiry. Compare the full range on our scissor lift rental Johor page, or WhatsApp us with your site, working height and start date.






