Skip to content
A&G EquipmentA&G Equipment

Scissor Lifts

Scissor Lift Battery Care: How to Charge It and Keep It Running All Shift

By Jonah Tan, Equipment Specialist · · 3 min read

Dingli JCPT1212HA battery scissor lift in A&G Equipment livery, stowed and ready for hire at the yard

A battery scissor lift that runs flat halfway through the afternoon stops the whole crew. The good news is that charging is simple, and a few habits keep the machine working all day. Here is how to look after the battery on a rental scissor lift.

Charge every night

The simplest rule: plug it in at the end of every shift, even if the battery gauge still shows charge left. A full charge overnight means a full shift the next day. Topping up only when the gauge is low is how machines run flat at 3pm.

Plan the charging spot before delivery

Agree where the scissor lift will be charged before it arrives:

  • A power point close to where the machine parks at the end of the day.
  • A dry, well-ventilated area, away from rain, water and anything that can burn.
  • A route where the cable will not be a trip hazard or get run over.
  • Somewhere secure, so the machine and charger are not moved or used by others overnight.

On large sites the power supply can be the hardest part, so ask the site office early.

Use the charger properly

  • Lower the platform fully and switch the machine off before charging.
  • Use a properly rated extension lead, fully unrolled, and avoid joining several leads together.
  • Let the charge cycle finish. Unplugging early, again and again, leaves less run time the next day.
  • Don’t cover the charger or machine while it is charging.

Habits that save battery during the shift

  • Switch off at breaks and at lunch instead of leaving the machine on.
  • Plan the work so the machine is not driving back and forth across the floor more than it needs to.
  • Drive with the platform lowered between work areas where possible.
  • Check the battery gauge at the start of the shift as part of the pre-use inspection.

Battery or diesel?

Battery scissor lifts are quiet and zero emission at the point of use, with non-marking tyres, so they suit indoor work, malls and finished floors. For outdoor sites and rough ground, a diesel rough-terrain model is the better choice. Our scissor lift height guide helps you pick the right size, and our rough-terrain scissor lift guide covers outdoor work.

Rent a battery scissor lift

Every A&G scissor lift is serviced and charged before delivery and comes with a valid PMA, with operator training available and 24/7 breakdown support for rental customers. We deliver to Johor, KL & Selangor. See our scissor lift rental range, or WhatsApp us with your working height, site and dates.

FAQs: scissor lift battery charging

How long does a scissor lift battery last?
A fully charged battery scissor lift normally lasts a full working shift of typical stop-start use. Heavy driving, long lifts and hot days use more charge, so charge it every night.
Can I charge a scissor lift from a normal power point?
Battery scissor lifts have an on-board charger that plugs into a normal power point. Use a properly rated outlet and extension lead, and ask us if you are unsure what your machine needs.
What happens if the battery runs flat on site?
Lower the platform, park the machine and plug it in. Avoid running the battery completely flat where possible. If the machine will not charge or keeps running down early, call us: rental customers get 24/7 breakdown support.

Machines we recommend for scissor lift battery charging

More guides related to scissor lift battery charging

Need a quote? We usually reply the same day.

Rates on enquiry · Aerial lifts delivered with PMA · Johor, KL & Selangor

Quick quote

Rates on enquiry. We usually reply the same day.